Fiber Optic Center will be atECOCandIWCS- Schedule your meeting with a member of the FOC team now

ÅngströmBond® AB9112 MIL-SPEC Fiber Optic Epoxy, Room Temperature & Heat Cure (2.5g)

AB9112-2.5G

ÅngströmBond® AB9112 Room Temperature Cure, 2-Part Epoxy, 2.5 Gram Packet

FOC SHELF LIFE GUARANTEE: MINIMUM 6 MONTHS AT TIME OF SHIPPING
The ÅngströmBond ®9112 MIL-SPEC Epoxy is a blue, room temperature and heat curing fiber optic connector epoxy with a long working life.It has been tested and qualified to MIL-A-24792A for fiber optic terminations.

Additional Features:
  • Bonds glass to metal, ceramic or plastic.
  • Very high glass transition temperature when heat cured.
  • Excellent choice for use in single and multimode connectors due to being very low stress.
Physical Properties:
  • Mixed Viscosity @ 25°C: 2000 cPs
  • Glass Transition Temperature, Tg: 93.5°C (degree celsius)!Tg: 200.3°F (degree Fahrenheit)
  • Shore D Hardness: 82
  • Service Temperature Range: -60°C to 130°C!-76°F to 266°F
Handling Characteristics:
  • Working Life: 40 Minutes
  • Minimum Cure Schedule:
    • @25°C - 12-18 Hours
    • @65°C - 30-60 Minutes
    • @90°C - 15 Minutes
    • @100°C - 5 Minutes
See Datasheet for additional properties, storage and handling notes
SDS
Product Change Notification:
As part of our product change notification requirements, Fiber Optic Center is to notify our customers of any changes in our product packaging.Fiber Optic Center is making the following improvement to the bi-pack material sleeve packaging of AB9112-2.5G.At Fiber Optic Center, we believe this change can ensure an even higher level of product quality and consistency, which is good news for our industry.

1.Burst pouch / Burst seal instead of dividing clip seal– The burst seal bi-pack is more environmentally friendly, since there is no plastic dividing clip.Additionally, the two parts of the burst seal are separated by a seal, so there is no chance for the material to migrate and mix.In rare cases when the dividing clip was not fastened properly, it allowed the resin and hardener to leak under the clip, which prematurely started the epoxy's pot life.With the burst seal bi-pack, this is not a concern.Please note Burst Pouch Instructions: //www.spnnc.com/foc-tips-instructions-for-burst-pouch-bi-packs/

Please note that although there is a change in the bi-pack sleeve, the following remains unchanged:
  • Part Number
  • Part A and Part B material
  • Plastic outer packaging that contains the bi-pack material sleeve
Response Required: No response is required.

Samples are available upon request.

NEW Burst seal packaged bi-packs will be provided after depleting our current style stock.

If you have questions related to AngstromBond® or the new packaging, or any other matter on which we may be of assistance, please feel free to contact Kelly Barker, Business Development Epoxies Fiber Optic Center: kbarker@www.spnnc.com

The ÅngströmBond® AB9112 MIL-SPEC Fiber Optic Epoxy, Room Temperature & Heat Cure (2.5g) will be at the following trade show(s)*:

  • OFC
  • ECOC
  • SPIE Photonics West
  • ANGA COM
  • IWCS Supplier Exhibition
  • Fiber Connect
*subject to change, please confirm with theFiber Optic Center team
Baidu
map