ÅngströmBond® AB9113SC Epoxy, Room Temperature & Heat Cure (2.5g)
AB9113SC-2.5G
ÅngströmBond® AB9113SC Room Temperature Cure, 2-Part Epoxy, 2.5 Gram Packet.
FOC SHELF LIFE GUARANTEE: MINIMUM 5 MONTHS AT TIME OF SHIPPING
FOC SHELF LIFE GUARANTEE: MINIMUM 5 MONTHS AT TIME OF SHIPPING
The ÅngströmBond
®9113SC is a blue, fiber optic connector epoxy based on one of the most popular chemistries used for terminating connectors.This low viscosity epoxy is designed to bond glass to metal, ceramic or plastic.
Physical Properties:
Physical Properties:
- Viscosity @ 25°C: 1800-2100 cPs
- Glass Transition Temperature, Tg: <116°C (degree celsius)!<240°F (degree Fahrenheit)
- Shore D Hardness: 78-83
- Service Temperature Range: -65°C to 125°C!-85°F to 257°F
- Working Life:
- For fiber optic terminations: 20-30 minutes
- For general bonding and casting: 30-60 minutes
- Minimum Cure Schedule:
- @25°C for 18 Hours
- @65°C for 1 Hour
- @90°C for 15 Minutes
- @100°C for 10 Minutes
- @120°C for 5 Minutes
Product Change Notification:
As part of our product change notification requirements, Fiber Optic Center is to notify our customers of any changes in our product packaging.Fiber Optic Center is making the following improvement to the bi-pack material sleeve packaging of AB9113SC-2.5G.At Fiber Optic Center, we believe this change can ensure an even higher level of product quality and consistency, which is good news for our industry.
1.Burst pouch / Burst seal instead of dividing clip seal– The burst seal bi-pack is more environmentally friendly, since there is no plastic dividing clip.Additionally, the two parts of the burst seal are separated by a seal, so there is no chance for the material to migrate and mix.In rare cases when the dividing clip was not fastened properly, it allowed the resin and hardener to leak under the clip, which prematurely started the epoxy's pot life.With the burst seal bi-pack, this is not a concern.Please note Burst Pouch Instructions: //www.spnnc.com/foc-tips-instructions-for-burst-pouch-bi-packs/
Please note that although there is a change in the bi-pack sleeve, the following remains unchanged:
Samples are available upon request.
NEW Burst seal packaged bi-packs will be provided after depleting our current style stock.
If you have questions related to AngstromBond® or the new packaging, or any other matter on which we may be of assistance, please feel free to contact Kelly Barker, Business Development Epoxies Fiber Optic Center: kbarker@www.spnnc.com
As part of our product change notification requirements, Fiber Optic Center is to notify our customers of any changes in our product packaging.Fiber Optic Center is making the following improvement to the bi-pack material sleeve packaging of AB9113SC-2.5G.At Fiber Optic Center, we believe this change can ensure an even higher level of product quality and consistency, which is good news for our industry.
1.Burst pouch / Burst seal instead of dividing clip seal– The burst seal bi-pack is more environmentally friendly, since there is no plastic dividing clip.Additionally, the two parts of the burst seal are separated by a seal, so there is no chance for the material to migrate and mix.In rare cases when the dividing clip was not fastened properly, it allowed the resin and hardener to leak under the clip, which prematurely started the epoxy's pot life.With the burst seal bi-pack, this is not a concern.Please note Burst Pouch Instructions: //www.spnnc.com/foc-tips-instructions-for-burst-pouch-bi-packs/
Please note that although there is a change in the bi-pack sleeve, the following remains unchanged:
- Part Number
- Part A and Part B material
- Plastic outer packaging that contains the bi-pack material sleeve
Samples are available upon request.
NEW Burst seal packaged bi-packs will be provided after depleting our current style stock.
If you have questions related to AngstromBond® or the new packaging, or any other matter on which we may be of assistance, please feel free to contact Kelly Barker, Business Development Epoxies Fiber Optic Center: kbarker@www.spnnc.com
The ÅngströmBond® AB9113SC Epoxy, Room Temperature & Heat Cure (2.5g) will be at the following trade show(s)*:
- ECOC
- ANGA COM