Fiber Optic Center will be atECOCandIWCS- Schedule your meeting with a member of the FOC team now
ÅngströmBond® AB9320 Blue Epoxy, Heat Cure (2.5g)
AB9320-2.5G
ÅngströmBond® AB9320, Heat Cure, 2 Part Epoxy, 2.5 Gram Packet
FOC SHELF LIFE GUARANTEE: MINIMUM 6 MONTHS AT TIME OF SHIPPING
FOC SHELF LIFE GUARANTEE: MINIMUM 6 MONTHS AT TIME OF SHIPPING
The ÅngströmBond® 9320 is a low stress, heat cured blue epoxy designed for terminating multimode and single-mode fiber optic connectors.This state-of-the-art adhesive has a working time of more than twice as long as standard adhesives used for multimode terminations.
Additional Features:
Additional Features:
- Very strong adhesion to glass, ceramic, metals and most plastics without causing fiber core cracking.
- Blue color for ease of polishing and a high glass transition temperature.
- This low outgassing epoxy meets NASA requirements of ASTM E595-93.
- Mixed Viscosity @ 25°C: <1800 cPs
- Glass Transition Temperature, Tg: 110°C (degree celsius)!Tg: 230°F (degree Fahrenheit)
- Shore D Hardness: 86
- Service Temperature Range: -55°C to 150°C!-67°F to 302°F
- Outgassing (cured 2 hours @80°C):
- Total Mass Loss (TML): 0.85%
- Collected Volatile Condensable Materials (CVCM): 0.00%
- Working Life: 60-90 Minutes
- Minimum Cure Schedule:
- @ 80°C - 30 - 120 minutes
- @ 90°C - 15 – 60 minutes
- @ 100°C - 10 – 30 minutes
Product Change Notification:
As part of our product change notification requirements, Fiber Optic Center is to notify our customers of any changes in our product packaging.Fiber Optic Center is making the following improvement to the bi-pack material sleeve packaging of AB9320-2.5G.At Fiber Optic Center, we believe this change can ensure an even higher level of product quality and consistency, which is good news for our industry.
1.Burst pouch / Burst seal instead of dividing clip seal– The burst seal bi-pack is more environmentally friendly, since there is no plastic dividing clip.Additionally, the two parts of the burst seal are separated by a seal, so there is no chance for the material to migrate and mix.In rare cases when the dividing clip was not fastened properly, it allowed the resin and hardener to leak under the clip, which prematurely started the epoxy's pot life.With the burst seal bi-pack, this is not a concern.Please note Burst Pouch Instructions: //www.spnnc.com/foc-tips-instructions-for-burst-pouch-bi-packs/
Please note that although there is a change in the bi-pack sleeve, the following remains unchanged:
Samples are available upon request.
NEW Burst seal packaged bi-packs will be provided after depleting our current style stock.
If you have questions related to AngstromBond® or the new packaging, or any other matter on which we may be of assistance, please feel free to contact Kelly Barker, Business Development Epoxies Fiber Optic Center: kbarker@www.spnnc.com
As part of our product change notification requirements, Fiber Optic Center is to notify our customers of any changes in our product packaging.Fiber Optic Center is making the following improvement to the bi-pack material sleeve packaging of AB9320-2.5G.At Fiber Optic Center, we believe this change can ensure an even higher level of product quality and consistency, which is good news for our industry.
1.Burst pouch / Burst seal instead of dividing clip seal– The burst seal bi-pack is more environmentally friendly, since there is no plastic dividing clip.Additionally, the two parts of the burst seal are separated by a seal, so there is no chance for the material to migrate and mix.In rare cases when the dividing clip was not fastened properly, it allowed the resin and hardener to leak under the clip, which prematurely started the epoxy's pot life.With the burst seal bi-pack, this is not a concern.Please note Burst Pouch Instructions: //www.spnnc.com/foc-tips-instructions-for-burst-pouch-bi-packs/
Please note that although there is a change in the bi-pack sleeve, the following remains unchanged:
- Part Number
- Part A and Part B material
- Plastic outer packaging that contains the bi-pack material sleeve
Samples are available upon request.
NEW Burst seal packaged bi-packs will be provided after depleting our current style stock.
If you have questions related to AngstromBond® or the new packaging, or any other matter on which we may be of assistance, please feel free to contact Kelly Barker, Business Development Epoxies Fiber Optic Center: kbarker@www.spnnc.com
The ÅngströmBond® AB9320 Blue Epoxy, Heat Cure (2.5g) will be at the following trade show(s)*:
- OFC
- ECOC
- SPIE Photonics West
- ANGA COM
- IWCS Supplier Exhibition
- Fiber Connect