Fiber Optic Center will be atECOCandIWCS- Schedule your meeting with a member of the FOC team now

    phone (800) IS-FIBER · (508) 992-6464

    Toggle Nav
    My Cart
    My Quote
    close
    Search

    Best Practices to Validate Your Epoxy Curing Schedule

    by:
    EPOXY: Blog Articles
    Published: January 4, 2018

    Part 3: Bonding Optical Fiber to the Ceramic Ferrule

    "How do I know what curing schedule I should use?"

    This is a common question that fiber optic cable assembly houses ask – and it's a particularly good question.Why?When our customers ask this question, it tells us they are focusing on a critical aspect of their bonding process.It tells us they have an appreciation for the vital role epoxy plays in the long-term reliability of their fiber optic cable assembly.

    Keep in mind, all epoxy processes must be very well defined and controlled, as this is one process that cannot be validated by subsequent inspection or testing in the production line.In fiber optic cable assembly manufacturing, nearly every process can be double-checked farther down the line.For example, cable cut-lengths can be re-measured at the end of the line to ensure they meet requirements.The polishing process can be validated with a visual inspection and interferometer inspection.Improper crimping can be tested with pull-testing, and so forth.However, the effectiveness of how well the epoxy was applied or cured cannot be observed, inspected, or tested (without destroying the product).The epoxy is hidden within the ferrule, and there's no way to observe if the proper amount of epoxy has been injected or whether the epoxy inside has been subjected to the proper curing temperature for the proper time.

    Furthermore, the bonding process has arguably the biggest effect on the long-term reliability of cable assemblies.The consequences of deploying fiber optic cable assemblies that do not have properly prepared, dispensed, and cured epoxy can be catastrophic.That's why you must have very tight controls in all aspects of the bonding process including epoxy mixing, application, curing, and testing.

    Bonding-Optical-Fiber-to-the-Ceramic-Ferrule-PART-3

    Best practices to validate your curing schedule

    Are you setting up a new bonding process and need to establish the curing schedule?Or is your production process set, but you are experiencing fiber movement and need to adjust curing temperature or time?Either way, follow this advice to validate your curing schedule:

    • The starting point– Always start with the epoxy manufacturer's recommendation for time and temperature.The optimum schedule may vary, depending on your application.Whatever curing schedule is selected, adhesive testing (as described in Telcordia GR-326, discussed below) will help to ensure the selected schedule is sufficient for your application.
    • Characterize the oven ports– If you thermally cure epoxy, you must characterize the oven ports.Note that you are not measuring the ambient temperature of the port!instead, you are measuring the temperature of the epoxy inside a connector.Using a thermocouple probe potted in a ferrule is a great way to characterize oven ports, because this mimics the actual epoxy curing process for your product.For example, let's say your curing schedule is 100 degrees C for 10 minutes.That doesn't mean you simply put a connector into a 100-degree oven for 10 minutes.The epoxy's temperature is influenced by the mass of the connector, so it may take 2 or 3 minutes for the epoxy's internal temperature to reach 100 degrees C.Your total curing time may be 12 minutes, not 10.ReadPart 2of this article series for step-by-step instructions to characterize your oven ports.
    • Build-in buffer time– While your curing time may be 12 minutes, you might adjust the timer to 15 minutes, giving you a 25% margin.You can't really over-cure by time.If epoxy curing time is a bit longer, there's no problem.However, if curing time is too short, there potentially can be problems with the bond and, therefore, with long-term product reliability.You always want to be conservative with epoxy due to the risk of shipping product with epoxy that isn't properly cured.If your customer deploys cable assemblies with improperly cured epoxy, the cost to your company to replace product – after it has been installed in the field – can be catastrophic.
    • Follow the Telcordia GR-326 standard– To validate your curing schedule, we strongly recommend incorporating adhesive testing into your bonding process, as described in Telcordia GR-326 (section 4.4.4.2).Adhesive testing is a simple, effective, and industry-accepted test to ensure you have a properly prepared and cured cable assembly.Simply put, in this test, a terminated ferrule is heated, and pressure is applied to the fiber to try to push it within the ferrule.If the fiber is not properly bonded to the ferrule, the fiber will move with this pressure.The amount of movement indicates how well the epoxy is bonding the glass fiber to the ceramic ferrule and, thus, whether the epoxy is properly cured.We highly recommend following this industry-standard – even if your customer's specs don't require it – due to the risk involved of shipping product that is not properly cured.Telcordia makes a clear effort to emphasize the importance of epoxy-related processes in GR-326.In addition to section 4.4.4.2 (adhesive testing), other valuable requirements are section 8.2.1.2.3 (qualification of epoxies) and R8-11 (this requires that samples of finished products are routinely subjected to simple tests, which give an indication of the effectiveness of the epoxy process).
    • Conduct DSC testing– We recommend you also conduct a Differential Scanning Calorimetry (DSC) test on each incoming lot of epoxy.Briefly, this test measures the outgassing of the epoxy sample, offering insight about whether it has been properly cured.Successful DSC tests, in conjunction with Telcordia GR-326, would give you high confidence that the epoxy is good and your processes are suitable.

    Conclusion: Long-term product reliability is largely about epoxy

    Unfortunately, a vast majority of fiber optic cable assembly houses do not treat the bonding process with the time, attention, and respect it deserves.Epoxy has a major impact on product quality.In fact, we believe epoxy is the number-one determining factor affecting the long-term reliability of the product.Acknowledging the criticality of epoxy processes to product reliability – particularly considering that process failures are often impossible to detect without specialized or destructive testing – is essential for any fiber optic cable assembly house.

    Bonding Optical Fiber to the Ceramic Ferrule SERIES:

    Click to learn more:

    Additional resources from the FOC team include:

    About the Author
    Kelly Barker Kelly Barker, Business Development, Epoxies, Technical Sales Kelly started her career in customer service, marketing and sales.Since then, she has been promoted to management positions in these departments, project management director, and new business development with a specialty in product line marketing strategy.Kelly joined Fiber Optic Center, Inc.from PennWell Corporation where she spent more than five years in business development within various industries including Fiber Optics, Cabling, Connector, LED, Military and Aerospace.She has worked extensively with adhesive manufacturers on their product lines and applications within these markets.Kelly graduated Magna Cum Laude from the University of Massachusetts at Lowell in 1997 with a BS degree in Marketing and Management and a minor in Legal Studies.She resides in Nashua, NH with her husband and two girls, Maizie and Audrey.She enjoys being involved in community activities, such as park and recreation sports with her girls, and enjoys camping and reading.Follow @EpoxyExprtsFOC
    Dan Rocheleau Dan Rocheleau, Business Development, Technical Sales Dan has worked in fiber optic cable assembly since 1986: starting as a part-time line operator for a local cable production company and working his way up through to management positions in large global companies.His experience includes positions in process training, supervision, product and process engineering, quality system development and management, factory general management, global factory startups, and global project management roles.He has held several overseas positions, opening and managing factories in Mexico, India, China, and Czech Republic.He has led global project efforts in sourcing / supplier auditing, global process standardization, and global operations strategic planning.Dan's extensive experience gives him a unique ability to relate to our customer's needs and challenges, helping Fiber Optic Center better help our customers continue to adapt and grow in the evolving and competitive fiber cable assembly market.
    Education Resources

    Light Brigade Certified Training

    About Fiber Optic Center, Inc.
    Fiber Optic Center, Inc., (FOC), is an international leader in distributing fiber optic components, equipment and supplies and has been helping customers make the best cable assemblies in the world for over two decades.Several areas of specialization and expertise, in which they are the industry leader, make them the preferred choice for many of the world's fiber professionals.In these key technology areas, FOC is "at least as technical as the manufacturer" about the products they sell.Striving to "make the business part easy," they offer outstanding and personal customer service, low or no minimum purchase order values, and from-stock delivery on industry-leading products and technology.FOC is the industry connection to the most innovative optical products, technologies and technical experts who integrate their manufacturing knowledge and vast experience into customers' worldwide operations. @FiberOpticCntr

    For further information contact:
    Fiber Optic Center, Inc., 23 Centre Street, New Bedford, MA 02740-6322
    Toll Free in US: 800-IS-FIBER or 800-473-4237 .Direct 508-992-6464.Email: sales@www.spnnc.comor fiberopticcenter@www.spnnc.com

    For media contact:
    Kathleen Skelton, Director of Strategic Marketing, C: 617-803-3014 .E: kskelton@www.spnnc.com
    Copyright Notice: Copyrights in all articles published on www.spnnc.com are owned by Fiber Optic Center, Inc.(FOC) or other individuals or entities.No content on www.spnnc.com may be reproduced, stored in a retrieval system, or transmitted in any form of by any means, electronic, mechanical, photocopying, recording, or otherwise, in whole or in part, without the prior written permission of Fiber Optic Center, Inc.
    Baidu
    map