QUESTION: Do you have a process for making double-clad fibers?ANSWER: Yes.In addition to providing process information on the Halide system, we can also provide process information on preform fabrication, stretching and sleeving operations, preform shaping,...
QUESTION: Do you provide process information for running the Halide system?ANSWER: Yes, we will provide the process information and instruction required to prepare a batch of anhydrous rare earth chloride, and a typical process recipe for an industry standard Yb...
QUESTION: What about OH incorporation, background loss?ANSWER: The OH incorporation in the core glass is typically about ¼ of a PPM which will give a water peak at 1380 nm of approximately 15 dB/km.The background loss of the fiber in the windows where the rare...
QUESTION: How do you control the concentrations of the various dopants?ANSWER: Concentrations of the dopants used in the Halide system are controlled using gas flow rates as well as temperature, just as is done with the standard MCVD system....
QUESTION: How do these fibers perform with respect to photo-darkening?ANSWER: Photo-darkening of Yb doped fibers depends not only on the doping process used but also on the composition of the fiber.We offer a photo-darkening preform recipe to be used with the...
QUESTION: What kind of laser or amplifier performance can be expected from fibers made with the Halide Process?ANSWER: For Er doped fiber used in EDFA's pumped at 1480 nm, efficiencies of ≈ 69% with optical gain of ≈ 35 dB have been demonstrated at 1550 nm....
QUESTION: Which rare earths can be deposited by Halide process?ANSWER: Rare earth elements that have been demonstrated are Ytterbium, Erbium, Thulium, Holmium, Neodymium and Cerium.Since most of the elements in the Lanthanide series exhibit identical chemical...
QUESTION: Can we prepare multi element rare earth anhydrous boats?ANSWER: Yes.This can be done by mixing the precursor rare earth compounds when preparing a halide batch.The most relevant application that comes to mind is the fabrication of Er/Yb doped...
QUESTION: What wt.% of rare earth is possible in the fiber?ANSWER: For preforms requiring high concentration, values of Tm3+ have been reported at ≈ 8.5 wt.%.This is by no means the limit of what is achievable. Answered by AskFOC Fiber...
QUESTION: How long does the anhydrous rare earth in the quartz boat last?ANSWER: A charge of rare earth material will last for at least 1 week and could last as long as several weeks depending on the number of preforms produced and the rare earth concentration...
