INTERCONNECT: Blog Articles

MPO cleaning guidelines are much like those for single-fiber connectors.In November 2020, Fiber Optic Center posted an article on cleaning and inspecting connector ends, Ten Practical Tips for Cleaning Connector Ends.With the article below, we are expanding ...

Recognizing that there are quite a few connectors on the market that are actively being used in fiber optic installations, there are also some older types and discontinued connectors, not being used in the mainstream of data and telco markets, but used in more...

Part 2: Introduction to Fiber Optic Cable Assembly Manufacturing.Key components of Fiber Optic Connectors and Key Specifications of Connectors.This article series introduces engineers and technicians to various aspects of the production process to manufacture ...

Where the telecommunication industry standardized their optical connectivity performance with visual, optical and geometrical measurements, the specialty fiber industry traditionally performs only a visual inspection on their fibers assemblies...

Throughout most of the telecommunication industry, manufacturing automation has flourished.Here's just one example of successful automation: fusion splicing.The operator preps the fiber ends, puts them into the splicer, and presses a button.The equipment...

For years, connectivity in the cable industry was considered a "throw it over the wall" issue with a focus on leaving the problem to others who then became responsible for the convenience of connecting the cables designed to the outside world.It wasn't...

How many times have you asked yourself: Why did this connector fail?I've been in the fiber optic industry since the 1980's and – despite amazing technological advances – this issue continues to plague our industry....

The first connector to be accepted as a widely used standard in the early days of the fiber optic industry, in the late 1970s, was designed by Amphenol in CT as a variation of their coaxial electrical connect known as subminiature assembly, or SMA.In those days, fiber...

Cross Sectioning of Fiber Optic Connectors questions answered here… how many methods and what are the options?There are currently three methods of looking inside a fiber optic connector: ...

In terms of long-term reliability, the "weakest link" of a connectorized cable assembly is the area within the ferrule which contains the strip "transition point" (where the buffered fiber is stripped down to bare fiber) and the majority of the injected epoxy....