phone (800) IS-FIBER · (508) 992-6464

    Toggle Nav
    My Cart
    My Quote
    close
    Search

    Cleaning the Entire Surface of an MT Ferrule Most Effectively

    by:
    CLEANING: Ask FOC Ask FOC
    Published: February 24, 2017

    QUESTION:  What is the most effective way for cleaning the entire surface of an MT ferrule?

    ANSWER:

    Ultrasonic cleaning of ferrules after polish, and guide-pin hole brushing during / after polish.

    Contamination on the surface of the ferrule is a major (if not THE major) contributing factor to poor testing performance (assuming, of course, that the connector was built properly and meets geometry specs).   The best way to clean entire ferrule surface, in my opinion, is to clean all ferrule in an ultrasonic bath (using filtered / DI water).  This removes all contamination from guide pins / holes and surface of the ferrule.

    Care should (and must) be taken through the entire assembly process after polishing, to minimize contamination of ferrule surface, guide pins, etc.

    Also: guide pin holes should be scrubbed with brush during polishing to make sure loose particles of abrasive or removed ferrule material don't stay in the holes and prevent future issues when mating/un-mating.

    ADDITIONAL CONTENT & RESOURCES:

    Answered by AskFOC Technical Team February 24, 2017

    Have a technical question for Fiber Optic Center?

    Please email your question toAskFOC@www.spnnc.comand we will respond ASAP.

    In addition to replying, we will post your question and our answer here on www.spnnc.com.  Everyone remains anonymous when we post so feel comfortable asking.  You can also search your question and others in our content search.

    About the Author
    FOC FAQ Fiber Optic Center has a team of technical experts and marketing strategists with decades of years in the field.This team contributes to the fiber, cable and specialty industries coverage through news, alerts, reports and general media information.
    Education Resources

    Light Brigade Certified Training

    About Fiber Optic Center, Inc.
    Fiber Optic Center, Inc., (FOC), is an international leader in distributing fiber optic components, equipment and supplies and has been helping customers make the best cable assemblies in the world for over two decades.Several areas of specialization and expertise, in which they are the industry leader, make them the preferred choice for many of the world's fiber professionals.In these key technology areas, FOC is "at least as technical as the manufacturer" about the products they sell.Striving to "make the business part easy," they offer outstanding and personal customer service, low or no minimum purchase order values, and from-stock delivery on industry-leading products and technology.FOC is the industry connection to the most innovative optical products, technologies and technical experts who integrate their manufacturing knowledge and vast experience into customers' worldwide operations. @FiberOpticCntr

    For further information contact:
    Fiber Optic Center, Inc., 23 Centre Street, New Bedford, MA 02740-6322
    Toll Free in US: 800-IS-FIBER or 800-473-4237 .Direct 508-992-6464.Email: sales@www.spnnc.comor fiberopticcenter@www.spnnc.com

    For media contact:
    Kathleen Skelton, Director of Strategic Marketing, C: 617-803-3014 .E: kskelton@www.spnnc.com
    Copyright Notice: Copyrights in all articles published on www.spnnc.com are owned by Fiber Optic Center, Inc.(FOC) or other individuals or entities.No content on www.spnnc.com may be reproduced, stored in a retrieval system, or transmitted in any form of by any means, electronic, mechanical, photocopying, recording, or otherwise, in whole or in part, without the prior written permission of Fiber Optic Center, Inc.
    Baidu
    map