phone (800) IS-FIBER · (508) 992-6464

    Toggle Nav
    My Cart
    My Quote
    close
    Search

    The 101 on Fiber Optic Connector Types

    by:
    INTERCONNECT: Blog Articles
    Published: January 1, 2021

    Part 3: Introduction to Fiber Optic Cable Assembly Manufacturing

    Recognizing that there are quite a few connectors on the market that are actively being used in fiber optic installations, there are also some older types and discontinued connectors, not being used in the mainstream of data and telco markets, but used in more specialized applications.

    In addition to the mainstream connectors are variants on the end face geometry such as Angle and Radius end faces for specific applications.

    The most common of currently used connectors are:

    LC, SC, MT/MPO and FC, while the older types such as SMA, ST, D4, Escon, Biconic, VF45 and MTRJ are still being used in the specialty applications and older installed fiber bases of similar connector types.

    Descriptions

    • LC

    A high-density connector for fiber optic applications used in both public and private networks.This high-performance connector is available in both single mode and multimode.

    • SC

    Subscriber connector, a push/pull connector style that is recognized as the preferred optical fiber connector standard.It is available in simplex, duplex, hybrid, or hardened styles.The SC (Subscriber Carrier) fiber optic connector is one of three connectors (the other two are ST and SFF) approved by ANSI/TIA/EIA 568-B.3.The SC Connector's main advantage is polarization since the connectors can be paired and keyed.

    • MT/MPO

    Multi-channel (4 to 72) connector from USConec (MPO is the generic version).

    • FC

    A connector type used primarily for Singlemode fiberoptic cable.It offers precise alignment of the cable with respect to the transmitter and detector.Using a threaded receptacle and a locator notch, once installed the position is maintained with absolute accuracy.

    • SMA

    (Subminiature A):  50 ohm - subminiature coaxial connector with screw-type coupling mechanism.Frequency range DC-18 GHz.

    • ST

    Type of connector used on fiber optic cable utilizing a spring-loaded twist and lock coupling similar to the BNC connectors used with coaxial cabling.

    • D4

    D4 connectors are made from a 2.5mm diameter ceramic (zirconia) ferrule for durability and one of the older generation connectors which is keyed, and spring-loaded and has a 2mm diameter ferrule.

    • ESCON

    ESCON (Enterprise Systems Connection) is a data connection created by IBM, and is commonly used to connect their mainframe computers to peripheral devices such as disk storage and tape drives.ESCON is an optical fiber, half-duplex, serial interface.… ESCON was introduced by IBM in the early 1990s.

    • Biconic

    A phenolic-bodied, threaded, spring-loaded, non-keyed connector with a cone-shaped alignment area.

    • VF45

    Duplex fiber connectors are primarily used in fiber-to-the-desk LAN applications.

    • MTRJ

    MT-RJ connector.MT-RJ connector.A fiber-optic cable connector that is very popular for small form factor devices due to its small size.Housing two fibers and mating together with locating pins on the plug, the MT-RJ comes from the MT connector, which can contain up to 12 fibers.

    European and Japanese Connectors

    European and Japanese Connectors are more widely used in specific parts of the world besides Europe and Japan.These are the DIN, E2000 and MU connectors.

    • DIN

    DIN connector is an electrical connector that was originally standardized in the early 1970s by the Deutsches Institut für Normung (DIN), the German national standards organization.… Some DIN connector standards are: DIN 41524, for circular connectors often used for audio signals.

    • E2000

    E2000 connectorlooks like a miniature SCconnector.Theconnectoris easy to install, with a push-pull latching mechanism that clicks when fully inserted.It features a spring-loaded shutter which fully protects the ferrule from dust and scratches.

    • MU

    MU Connector is a small form factor SC that looks like a miniature SC with a 1.25 mm ferrule.It is a popular connector type in Japan.

    Fiber Optic Contacts

    Fiber optic contacts, similar to the installation/processing of standard connectors, are widely used in "multi-contact Hybrid circular connectors" that contain from 2- 12 Fiber Optic contacts alongside electrical contacts.Examples are the Luxcis 801, Mil 29504, and others under various names and applications such as:

    • Broadcast Industry
    • Oil and Gas
    • Defense/Military
    • Commercial and Mil Aviation
    • Medical
    • Industrial

    FOC Glossary includesGlossary Definitions,Acronyms, andMilitary Specifications for Connectors

    EDITOR'S NOTE: This is the third article in an ongoing series, "Introduction to Fiber Optic Cable Assembly Manufacturing.":

    This article includes

    • Key components of Fiber Optic Connectors and Key Specifications of Connectors
    • Key components of fiber optic connectors
    • Key specifications of connectors
      • Connector housing
      • Ferrule
      • Flange
      • Crimp sleeve
      • Strain relief boot
      • Spring
      • Backshell
    • Key specifications of connectors
      • Ferrule hole diameter
      • Ferrule hole
      • Ferrule hole to outside diameter (OD)

    From the FOC Library of Blog Articles on Connectors:

    Additional resources to continue your education:

    About the Author
    Mario Goduco Mario Goduco, Business Development, Technical Sales Mario has over 25 years in manufacturing, operations and business development with AMP, Thomas and Betts, Aster Corp., and Adirondack Wire and Cable design, manufacturing and sales of fiber optic connectors, fiber optic cable assemblies, optical splitters/wdms.In the last 15+ years with Fiber Optic Center, he has set up and/or optimized manufacturing facilities for fiber assemblies at over 100 companies worldwide.In a previous position as VP-Operations for US Fiber Optics, he created and managed assembly manufacturing facilities in the U.S., Mexico and China.He has written 4 papers on the processing of singlemode connectors and remains one of the pioneers in manufacturing low return loss connections.He has worked with fiber assembly operations in Asia, Australia, Europe, India and Africa.Mr.Goduco continues to provide technical consultation in the setup, staffing, operations and qualification of fiber optic assembly manufacturing all over the world.
    Education Resources

    Light Brigade Certified Training

    About Fiber Optic Center, Inc.
    Fiber Optic Center, Inc., (FOC), is an international leader in distributing fiber optic components, equipment and supplies and has been helping customers make the best cable assemblies in the world for over two decades.Several areas of specialization and expertise, in which they are the industry leader, make them the preferred choice for many of the world's fiber professionals.In these key technology areas, FOC is "at least as technical as the manufacturer" about the products they sell.Striving to "make the business part easy," they offer outstanding and personal customer service, low or no minimum purchase order values, and from-stock delivery on industry-leading products and technology.FOC is the industry connection to the most innovative optical products, technologies and technical experts who integrate their manufacturing knowledge and vast experience into customers' worldwide operations. @FiberOpticCntr

    For further information contact:
    Fiber Optic Center, Inc., 23 Centre Street, New Bedford, MA 02740-6322
    Toll Free in US: 800-IS-FIBER or 800-473-4237 .Direct 508-992-6464.Email: sales@www.spnnc.comor fiberopticcenter@www.spnnc.com

    For media contact:
    Kathleen Skelton, Director of Strategic Marketing, C: 617-803-3014 .E: kskelton@www.spnnc.com
    Copyright Notice: Copyrights in all articles published on www.spnnc.com are owned by Fiber Optic Center, Inc.(FOC) or other individuals or entities.No content on www.spnnc.com may be reproduced, stored in a retrieval system, or transmitted in any form of by any means, electronic, mechanical, photocopying, recording, or otherwise, in whole or in part, without the prior written permission of Fiber Optic Center, Inc.
    Baidu
    map