Fiber Optic Center will be atECOCandIWCS- Schedule your meeting with a member of the FOC team now
Dymax OP-83-LS Hybrid UV & Heat Cure Adhesive (10ml)
OP-83-LS-10ML
Dymax OP-83-LS Low Shrinkage Optical Positioning, Camera Module, LiDAR bonding, Multi Cure Adhesive with LED and Heat Cure capability, 10ml Syringe.Requires plunger, P3282-10ML, for manual operation.
COLD SHIP/COLD STORE.
1-5C REFRIGERATED STORAGE REQUIRED.
DROP SHIP DYMAX, FULL SHELF LIFE 7 MONTHS.
**MUST BE PURCHASED IN SETS OF 10**
COLD SHIP/COLD STORE.
1-5C REFRIGERATED STORAGE REQUIRED.
DROP SHIP DYMAX, FULL SHELF LIFE 7 MONTHS.
**MUST BE PURCHASED IN SETS OF 10**
The Dymax OP-83-LS Hybrid UV & Heat Cure Adhesive is a very low shrinkage, fast-curing UV/Visible light-curable epoxy with superior adhesion for camera modules.OP-83-LS is specially formulated to cure primarily with UV light and includes a low-temperature heat-curing function in applications where shadow areas exist or where heat-only curing is preferred.Their ability to cure in seconds enables faster processing, greater output, and lower processing costs.Packaged in a 10ml adhesive syringe, this Dymax product is also compliant with RoHS standards, aligning seamlessly with directives 2015/863/EU for environmental responsibility.
Features:
Features:
- Very fast UV/Visible light cure
- Low-temperature (80-85°C) Heat cure capability
- Moisture and thermal cycle resistant
- One component, no mixing required
- Cold ship/cold storage at 1-5°C
- Appearance: Off-white opaque to charcoal translucent gel
- Viscosity: 86,000 cP
- Thixotropic Ratio: 6.5
- Shelf Life: 7 months at recommended conditions from date of manufacture
- Durometer Hardness: D94
- Tensile at Break: 36.7 MPa, 5,238 psi
- Elongation at Break: 1.2%
- Modulus of Elasticity: 3,983 MPa, 578,000 psi
- Glass Transition Temp, Tg: 184°C
